Leap TT Shift – for Sram Wireless Blips

Wireless Blips TT Shift Mounts. 

• Button surface:Grip Button
• Leap Logo:With Logo
• Custom Engraving:No Custom Engraving
• Tool Option:With Tool

✓ Very strong clamping mechanism (Mounts can be used as fingerhooks).
✓ One size fits all – The clamping reach minimal 18mm up to 22mm internal.
✓ Only 25mm insertion depth in the bars is needed.
✓ Large button area – The whole top cover can be pressed to engage the wireless blips
✓ Mount is always 100% in the center of the handlebar – thanks to the 3 sided clamping mechanisme.
✓ The best possible aerodynamic design.
✓ Extremely lightweight at 23.7 gram for the mounts only (39.3 gram including blips).
✓ Ergonomic design – without any sharp edges.
✓ Optional installation tools.

Tested during the Unbound XL race (9th place). The mounts are strong enough to use during heavy technical gravel rides.

The product is including:

• A set of 2 TT Shift Mounts  (1 left and 1 right)
• Optional Wireless Blip tool and 2.5mm hex key

The TT mounts need 2 Wireless Blips (not included) for up and down shifting
The Wireless Blips can control all Sram wireless shifting components:
– SRAM RED (XPLR) (ETAP) AXS Rear Derailleur
– SRAM FORCE (XPLR) AXS Rear Derailleur
– SRAM RIVAL (XPLR) ETAP AXS Rear Derailleur
– SRAM APEX (XPLR) AXS Rear Derailleur
– SRAM RED (ETAP) AXS Front Derailleur
– SRAM FORCE AXS (WIDE) Front Derailleur
– SRAM RIVAL ETAP AXS (WIDE) Front Derailleur
– SRAM (XX / X0 / GX / S1000) (SL) EAGLE TRANSMISSION Derailleur
– SRAM (XX1 / X01 / GX) EAGLE AXS Derailleur
– Garmin / Wahoo / Hammerhead Cycle Computers

The wireless blips CAN NOT control:
–Rockshox Reverb AXS (XPLR) Dropper Post
–Rockshox Flight Attendant

• Fits on the end of a extension bar with a minimum internal diameter of 18mm (0,71″) and a maximum internal diameter of 22mm (0,87″).
• The kit comes with optional 2.5mm alan key.
• The set comes with 2 Wireless Blip Holders
• Fully 3d printed.
• Material: Industrial Carbon Filled Nylon (CF15)
• Print resolution: 0.08mm