Sync Aerobar Three Extensions

Description

Please include the following information in the notes when placing your order:

What make and model of computer do you use?

What groupset do you use and do you want Tri or UCI grips?

Professional cyclists and professional Triathletes demand everything in a set of aerobars. Athlete-specific fitment, adjustability, comfort and outright aerodynamic performance.

Aerobar Three is more than a simple evolution, it is an aerobar ecosystem that sets the standard for high-performance time trial cockpits.

AB03 Extensions

– UD carbon with aluminium threaded inserts.

– Three extension lengths available: Small, Medium and Large.

– Telescopic design allowing for fine tuning of extension length, with 30 mm that can be trimmed from the extension.

– Two extension clamp lengths are included: Medium and Large.

– Large clamp offers an additional 30 mm of extension reach.

– 6061 T6 aluminium extension clamps, maximising strength in the most critical region of the extensions.

– AB03 angle adjustable Clamp Cradles, 6061 T6, maximising strength and reliability.

– Self-aligning with extension clamp for easy assembly, dowel pins for assisted alignment with lower spacer components.

– 15, 20 and 25 degree clamp cradles available plus angle adjustment wedges at 2.5 and 5 degrees cater for 15-30 degrees total range.

– PA11 MJF printed accessories, including grips, computer mounts and BTAs.

AB03 Fit Kits

– Designed specifically for our AB03 extensions.

– Self-aligning with extension clamp for easy assembly, dowel pins for assisted alignment with lower spacer components.

– 6061T6 and 7075T6 aluminium as per component mechanical requirements, black anodised for a hard-wearing and robust finish.

– Three extension widths supported: 135 mm, 115 mm and 95 mm. See bike-specific Fit Kits for more information.

– Centre Stack and Dual Stack bikes supported. See bike-specific Fit Kits for more information.

– Dowel pins for assisted assembly.

– All bolts up to 50 mm are A2 stainless steel.

– All bolts 50 mm and above are G12.6 zinc-plated.