Road Bike Complete Overhual/Rebuild service

Description

Intense use over a few seasons can take a toll on any bike. Luckily, most high quality bikes can be restored to their former levels of performance with a thorough overhaul.

In this service package, we completely strip down your bike to clean, inspect (and replace if needed) every single component of your bike.

The rebuild process consists of these steps:

– thorough bike wash and drivetrain clean using professional supplies and techniques
– a complete strip down of the bike, removing the wheels, drivetrain and components
– removing the tires (and tubes), inspection for cuts and wear
– truing the wheels and re-setting the spoke tension, inspecting and/or replacing the rim tape
– cleaning sealant buildup and replacing tubeless sealant
– a complete strip down, inspection and cleaning of the hubs and freehub
– either cleaning-regreasing or replacing all wheel bearings
– a disassembly of the crankset and chainrings, with successive cleaning, re-application of installation media and reassembly
– chain wear check, re-lubing/re-waxing
– BB  disassembly, cleaning and regreasing
– pulley wheel disassembly, cleaning and regreasing
– seatpost + seat clamp cleaning and regreasing/friction paste
– headset cleaning and regreasing, including a reassembly and tightening of the expander plug
– cleaning and regreasing the thru axles, with a torque check and brake adjustment if needed
– brake pad replacement, and rotor wear check and cleaning, brake fluid flush and bleed
– bar tape replacement, handlebar, stem and brake lever inspection, torque check and regreasing/friction paste
– visual inspection of the frame and fork, paint buff where applicable
– inspection of the pedals and pedal bearings, clean and regrease if possible
– firmware upgrades for the groupset and power meter, charging all components, installation of fresh batteries
– application of a protective wax coating on the frameset

After posting your order, we will contact you regarding a suitable date to schedule a service for your bike.

The typical wait time is 2 weeks from the date of reservation to the beginning of the service procedure. The typical time to the finish of the service is 5-7 business days. In case we find parts that need to be changed during the inspection, the finish time will depend on the availability of these parts.

The price includes LABOUR COSTS ONLY.

It does not cover the price of parts that we find to need replacing during the service.