Check out or latest addition to the product line-up: CYBREI Cranks and components!

Categories

OVERFAST AEROX Carbon Crankarm | DUB | Easton

Aero? Lightweight? Why not both.

470.00 exc. tax

Description

Aero? Lightweight? Why not both.

Aero Carbon Crankarms | 325g (DUB) ±15g | EASTON-compatible spider interface

44mm chainline | 155 to 172.5mm in 8 lengths

Three axle variant: DUB (28.99mm)


The Aerox is Overfast’s aero-focused crankarm, sitting alongside the Vela in their lineup with an emphasis on aerodynamic shaping (though only 25g heavier than the Vela).

Keeping the carbon construction of all Overfast products, the arm length range extends lower than the Vela (from 155mm to 172.5mm in 8 steps). This makes it a better option for smaller/junior riders.

All three variants share the same EASTON/SRM-compatible spider interface and 44mm chainline as the Vela, so chainring and spider power meter options are identical across both crankarm models.

 

Features

Aero-Shaped Aluminium Construction

The Aerox uses an aerodynamically profiled carbon, prioritising drag reduction and stiffness. The aero shaping is most relevant for riders spending time at higher speeds where crank arm drag is a measurable factor, including TT-adjacent road riding and triathlon.

EASTON or SRM-Compatible Spider Interface

The Aerox uses the same EASTON-compatible spider interface as the Vela, giving it broad compatibility with EASTON-pattern chainrings and third-party spider power meters including Sigeyi/XCADEY power meters. The SRM version is also available at an additional cost, with no change to geometry or chainline.

Eight Arm Length Options from 155mm

Eight arm lengths run from 155mm to 172.5mm, with the 155mm and 157.5mm options extending the range lower than the Vela. For smaller riders or those prescribed shorter cranks through bike fitting, this is a practical advantage that most aftermarket crankarms do not offer.

DUB and 24mm Axle Variants

The DUB variant uses a 28.99mm axle for direct compatibility with SRAM DUB bottom brackets. The Ti24 and Ti24 GR variants use a standard 24mm axle, compatible with a wide range of road and gravel bottom bracket standards. The Ti24 GR is built around gravel use.

 

Specifications

Variants DUB / Ti24 / Ti24 GR (Gravel)
Axle Diameter 28.99mm (DUB)
Q-Factor 148mm (all variants)
Chainline 44mm (all variants)
Spider Interface EASTON Compatible
Weight (DUB) 325g ±15g

Additional information

Weight N/A
Crankarm Length

165mm, 170mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products
cybrei spares

Price range: 9.00€ through 19.00€ exc. tax