Dynamic Wander Endurance Hot Wax 240g

Melt Wander Wax in a wax heater between 75-85 degrees Celsius. Ensure the drivetrain and chain are fully degreased and dry. Submerge the chain in the wax for at least 15 minutes, slowly remove the chain from the wax and let it cool completely. Break each chainlink so it can move freely. Use a clean, dry microfibre cloth to remove excess wax from the chain. Remount the chain on the bike, and you are ready to ride.

During the first ride the wax needs some time to run in, a short 10 minute warm-up is plenty. After this any excess wax will be pushed out of the chain and can leave flakes on the chainstay and drivetrain. These flakes will fall off while riding or can be removed with a clean and dry microfibre cloth. For cleaning between wax applications, run the chain through a clean, dry cloth. Use a clean and dry brush to remove wax residue from other drivetrain parts.

Reapply the wax when the chain sounds ‘dry’, by repeating the steps in the application above. The waxed chain can be wiped clean and directly inserted into the liquid wax without further degreasing.

After 10-15 reapplications, the wax should be replaced to prevent contaminants from impacting drivetrain efficiency and wear.