Framesandgear Seatpost Radar & Light Mount for Factor One – Garmin – Oilslick

Description

The Framesandgear Seatpost Radar and Light Mount for Factor One provides a seatpost rear mounting point for the selected radar or light device. It is made for riders who need a precise fit for a specific seatpost shape. Therefore, it helps keep the rear setup clean, stable, and aligned, and allows for customization of the fitting bolt.

The seatpost mount is intended only for the model or seatpost standard named in the product title and compatibility section to avoid unwanted movement.

What you get

• 1 x Framesandgear Seatpost Radar and Light Mount with a fitting bolt in the selected color

When to use it

• Use it when you need a rear mount matched to the seatpost shape, named for this product
• Use it when you want to position a compatible radar or light below the saddle area without straps for a clean fit

Key specs

• Product type: Seatpost Radar and Light Mount
• Compatibility: Factor One
• Rear device fit: Garmin Varia RTL515/516/RearVue 820, Wahoo TRACKR, Magene L508, and Bryton Gardia R300L (select above)
• Color: Black
• Bolt Color: Black, Gold, or Oilslick (select above)
• Mount position: Seatpost
• Material: HP Nylon PA12
• Weight:

Installation guide

Installation is quick and secure. Follow these steps:

1. Prepare the Seatpost
Clean the seatpost area and make sure the mount matches the seatpost shape.

2. Position the Mount
Place the mount against the seatpost and align it correctly.
For model-specific mounts, match the mount to the seatpost profile for a flush fit.

3. Attach the Mount
Insert and tighten the bolts evenly until the mount sits securely.
Tighten the screw from the non-hexagon (round hole) side when tightening the clamp screw, so it meets the nut in the hexagon side when tightening.

4. Install the Garmin Varia Device
Align the tabs on the Varia with the mount, then turn it clockwise until it locks.

5. Final Check
Make sure the mount is stable, the device does not rattle, and the radar and light performance are directly backward.

Why use a seatpost-mounted light or radar setup

A seatpost-specific fitting gives the rear device a defined mounting point that matches the bike’s shape. Because the interface is model-specific, it supports a cleaner fit than a strap-based setup. As a result, the device sits in a controlled position with better alignment.